2. Application of induction synchronizerThe inductive synchronizer is made using the principle that the mutual inductance of two planar windings varies with position. Its function is to convert the angular or linear displacement into the phase or amplitude of the in...
3. Servo system and measurement feedback systemServo system is an important part of CNC machine tools and is used to realize feed servo control and spindle servo control of CNC machine tools. The function of the servo system is to convert the command information rec...
This composition OF THE CNC MACHINEThe processing of CNC machine tools can accurately estimate the processing time in advance, standardize and modernize the tools and fixtures used, and easily realize the standardization of processing information. It has been organi...
Compared with traditional machine tools,CNC machine tools have the following characteristics.1. Highly flexibleMachining parts on CNC machine tools mainly depends on the processing program. It is different from ordinary machine tools. It does not need to be manufact...
A CNC machine tool A CNC machine tool (Computer numerical control machine tools, digital control machine tool) is an automatic machine tool equipped with a program control system, which can make the machine tool move and process parts according to the programmed pro...
8.Maintenance of Permanent magnet lifter1. In the process of hoisting and moving the permanent magnet jack, try to avoid the collision and knocking of the contact surface, so as not to affect the performance and life. The bottom surface is best protected with oil wh...
5 Structure of Permanent magnet lifterThe permanent magnet lifter is composed of high-performance NdFeB permanent magnetic material to form a strong magnetic system. Through the rotation of the handle, the magnetic force of the strong magnetic system is changed...
Permanent magnet lifterPermanent magnet lifter: also known as permanent magnet suction lifter, magnetic crane, magnetic lifter, lifting magnet, lifting permanent magnet, permanent magnet, etc. It has the characteristics of small size, stronger holding force, no elec...
The magnetic seat drill The magnetic seat drill is a kind of magnetic seat coil at the bottom of the magnetic seat drill that cuts the magnetic field after passing the current to generate a strong magnetic force, which is directly adsorbed on the surface of the...
(3) After sharpening, erect the milling cutter on the platform. If the shaft is vertical, all the blade tops can be level, and the deflection angle of the blades can be symmetrically centered vertically, thus meeting the requirements.This can also be modified by usi...
“MRCM do NOT have any MOQ requirement. We can send a sample model to you for quality check and test within 72hours. It's ALL FREE ! ”
